A classic greenhouse design – span-roof greenhouse EcoSlider EH. It is a rectangular greenhouse with vertical walls and span-roof.
Main benefits of this greenhouse are: increased planting area, excellent lighting, convenient access to plants. Span-roof ensures sufficient structure height, especially in the middle, where the owner of the greenhouse usually is moving.
Foundation of the EcoSlider EH is made of special reinforced beams with internal weaving that adds extra durability. Both greenhouse ends are equipped with large doors with big vent windows.
This greenhouse model is available with standard 4 mm thick polycarbonate cover, or with 6 mm, 8 mm or 10 mm thick polycarbonate cover, which will make the greenhouse much more resistant to large snow loads. There is no need to remove snow from the roof of the greenhouse in winter.
EcoSlider EH assembly modules are made in standard length of 2.1 m, allowing to extend the greenhouse by purchasing additional modules.
If necessary, the greenhouse can be moved from one location to another - no disassembly required. Don't forget to tightly fix the greenhouse to the ground in the new spot.
Customers also have an option to install automatic mechanisms for opening vents in the roof.
|Length (m)||2.0 m – 4.1 m – 6.2 m – 8.3 m – 10.4 m|
|Width (m)||2 m|
|Side wall height (m)
Apex height (m)
|Frame type||Galvanized steel with increased amount of zinc|
|Greenhouse end cover material||Cellular polycarbonate of European production – 4mm (6mm or 8mm)**|
|Greenhouse cover material||Cellular polycarbonate of European production 6mm or 8mm|
|Foundation frame base||Galvanized steel with increased amount of zinc|
|Maximum vertical load (kg/m2)||Up to 700 kg/m2|
|Assembly and installation time||4 – 7 hours**|
|Transportation||Passenger vehicle with a trailer or a cargo minibus|
|Approximate service life||20 years|
|Ventilation system||Greenhouse end doors (at both ends) are equipped with large vents
Automated roof vent***
EcoSlider EH BASIC – greenhouse model is equipped with 4mm polycarbonate cover and galvanized steel foundation frame, protective AntiDUST ribbons for polycarbonate and U- profiles. Distance between beams - 105 cm
EcoSlider EH PREMIUM – greenhouse model is equipped with 6mm polycarbonate cover and galvanized steel foundation frame, protective AntiDUST ribbons for polycarbonate and U-profiles.
EcoSlider EH EXCLUSIVE – greenhouse model is equipped with 8mm polycarbonate cover and galvanized steel foundation frame (approximately 10% warmer than PREMIUM model and 1.5 times more durable), protective AntiDUST ribbons for polycarbonate and U-profiles.
EcoSlider EH PRO is the most durable and warm type of greenhouse. A 66 cm truss spacing and additional reinforcements, as well as sturdy 10 mm thick polycarbonate allow to heat the greenhouse during the cold season. The greenhouse is equipped with additional polycarbonate protection: solid and perforated AntiDUST tapes and U-profiles, and a special thermal insulating filler for the base frame.
* Available at extra charge
** Depending on the length of the greenhouse