Description
This greenhouse will become your favorite place in the garden. The basic configuration of the Ecoslider House Lux greenhouse with a width of 2 meters is enough to feel comfortable while gardening. Add windows, garden beds, a watering system — and the greenhouse is ready for work.
Structure
The structure of the gable greenhouse Ecoslider House Lux 2m is resistant to strong winds and heavy snowfall. You will not have to clear the roof after every snowstorm. The stability of the entire structure is achieved through the use of patented trusses, which form the entire load-bearing part of the frame. The entire structure is protected against corrosion with a special zinc coating and coated with black paint.
Glazing and Protection
The basic configuration uses 6 mm thick cellular polycarbonate. You can increase the density of the covering — select 8 mm or 10 mm thick polycarbonate in the configurator. The polycarbonate cells are protected from moisture and dust with a U-profile and special membrane tape.
Ventilation
Fresh air reaches the plants through open doors or end wall windows. There are additional windows Smartventor (also our own development), which open manually or automatically. If desired, the greenhouse can be equipped with additional windows installed in the roof, with automatic or manual control.
Delivery and Installation
Delivery and installation are available throughout Estonia. In other countries, we have regional representatives. Self-pickup and self-installation are possible.
The following can be additionally ordered for the Ecoslider House Lux 2m greenhouse:
- House Lux manually operated ventilation windows
- House Lux automatically operated ventilation windows
- Univent — automatic mechanism for window control
- Automation for Smartventor window
- Foundation piles
- Foundation with thermal insulation
- Gutter set for water collection from the House Lux roof
- 2 types of garden beds: II and U
- Autonomous Ecoslider Micro-Drip 30 watering system for 30 plants
- Hose and fitting kit for watering additional plants
- Electro&Water — module with two electrical sockets and one water socket
- House Lux end shelf kit
- House Lux side shelf kit
- House Lux plant tying kit
Characteristics
| Technical specifications |
Ecoslider House Lux 2m |
| Model |
House Lux |
| Shape |
Gable roof |
| Width |
2.0 m |
| Available length |
2.7m / 4.1m / 5.5m / 6.9m / 8.3m / 9.7m / 11.1m / 12.5m / 13.9m / 15.3m |
| Area |
from 5.4 to 30.6 m² |
| Side wall height |
1.844 m |
| Height at the ridge |
2.43 m |
| Entrance opening (W×H) |
1.5 m x 2.3 m |
| Ventilation |
2 end walls: Each end wall includes a Smartventor vent; each door includes a window. Manual operation. |
| Frame and protection |
|
| Frame type |
Steel with increased zinc content, reinforced design based on patented trusses |
| Zinc layer |
Z275 (275 g/m²) |
| Metal coating |
Double-sided polymer coating |
| Color |
Black (RAL 9005) |
| Space between trusses |
~700 mm |
| Glazing and panel fastening |
|
| Coating material |
6 mm cellular polycarbonate |
| Fastening/sealing |
Rubber seals, protective tape |
| Loads and operation |
|
| Maximum snow load |
1200 kg/m² |
| Maximum wind load |
90 kg/m² (corresponds to a wind speed of 38 m/s) |
| Estimated service life |
20 years |
| Assembly and transportation |
|
| Transportation |
Passenger car with a trailer or cargo minibus (check with the manager) |
| Assembly and installation time |
|
| Greenhouse length, m |
Installation time, hours |
| 2.7 m |
4–5 |
| 4.1 m |
6–7 |
| 5.5 m |
8–9 |
| 6.9 m |
10–11 |
| 8.3 m |
12–13 |
| 9.7 m |
14–15 |
| 11.1 m |
17–18 |
| 12.5 m |
19-20 |
| 13.9 m |
21-22 |
| 15.3 m |
23-24 |
| PS: Remove the film from the frame, reassemble |
5–10 |
| Warranty |
|
| Frames warranty |
15 years (protection against through corrosion) |
| Polycarbonate warranty |
10 years |
| Warranty on small and moving parts |
2 years |
| Warranty on installation performed by our specialists |
2 years |
The basic set includes:
- Structure made of black galvanized steel
- 6 mm cellular polycarbonate
- Rubber seals and protective tape
- Foundation frame
- Swing doors — 2 pc
- SmartVentor vent (manual operation) in the end walls — 2 pcs
- Door vent window (manual operation) — 2 pcs
Accessories that can be added:
- Manual Window for House Lux
- Automatic Window for House Lux
- Ecoslider Autonomous Irrigation System Micro - Drip 30 (for 30 plants)
- ElektroWater — module (2 electrical sockets + 1 water outlet)
- End shelf kit (3 shelves)
- Side shelf kit (2 shelves)
- Plant tying kit
- Gutter set for water collection from the House Lux roof
- 47-liter rainwater collection tank
- Garden tools
- Garden beds II or U (on request)
- Foundation with thermal insulation
- Foundation piles
Reviews
There are no reviews yet.